VIBCO Heavy Duty Electric Vibrators are Made in the USA by skilled craftsmen and women who follow NEMA and ASTME standards. VIBCO’s Heavy Duty Electric Vibrators are totally enclosed, can operate in continuous duty cycles, and are virtually silent.  These vibrators are “workhorse” vibrators and can be used inside or outside in dust, dirt, rain or snow. VIBCO’s Heavy Duty Electric Vibrators are used to speed the flow of bulk materials through any size bin, hopper or chute. They are also ideal for packing material in drums and bags, consolidating concrete in the precast and prestressed concrete industries, and aiding the efficiency of material through screens. These vibrators have adjustable eccentrics, are completely noiseless, are available in single and three phases, and are totally enclosed for indoor and outdoor use.

VIBCO DC Vibrators are Ideal for Mobile Applications; they are rugged, durable, made in the USA 12 Volt and 24 Volt vibrators for use on all sizes and types of mobile equipment. These vibrators are used on Fertilizer Spreaders and Farm Equipment, Ice Control and Sand Spreaders, Dump Trucks including Large Tri-Axle “Coal Bucket” Trucks, Mobile Bins and Hoppers, Concrete Pumps, Grizzlies, and much more.

VIBCO’s Model US High Frequency line are 115 volt single phase motors with low amperage draw. They can be plugged into any light outlet or operated from field generators. All units are speed adjustable with rheostat or electronic speeds controls and is totally enclosed. US-900 and 1600 have adjustable eccentrics. The US line is, due to the high frequency, rated for intermittent operation and 230 volt is available on most models. These high frequency vibrators are ideal for all concrete work for concrete product for vibrator faster pouring, less cement needed, high impact, greater density, light weight, smoother finish, faster form removal, and an assortment of brackets available.

VIBCO’s Model CE electric motor vibrators are chemically rated and are for applications where only a small shake is necessary, but big vibrator reliability is a must. Great for activating small hoppers, screens, chutes, tables, filling machines etc. Controlled flow is obtained on all types of materials including powders, flakes, pills, bottle caps and jars etc. Speed and force can be adjusted on most models with simple rheostats or speed controllers. Completely noiseless operation (no more sound than a fan motor) makes these vibrators desirable in applications where noise is irritating or fatiguing for the employee. Most units available in 230 volt, 50 or 60 cycles. Rugged construction permits continuous operation or repeated start and stop operation in any position. SPR-40HD, 60HD 80HD and the SPRT60HD 80HD and CE are heavy duty units with oversized bearing and cast iron bell, instead of aluminum, for extra long life. These vibrators are compact, noiseless, continuous duty, lightweight, can take any number of starts and stops, and has convenient 115V plug in operation.

VIBCO’s Model SPR electric motor vibrators are especially developed for thousands of applications where only a small shake is necessary, but big vibrator reliability is a must. Great for activating small hoppers, screens, chutes, tables, filling machines etc. Controlled flow is obtained on all types of materials including powders, flakes, pills, bottle caps and jars etc. Speed and force can be adjusted on most models with simple rheostats or speed controllers. Completely noiseless operation (no more sound than a fan motor) makes these vibrators desirable in applications where noise is irritating or fatiguing for the employee. Most units available in 230 volt, 50 or 60 cycles. Rugged construction permits continuous operation or repeated start and stop operation in any position. SPR-40HD, 60HD 80HD and the SPRT60HD 80HD and CE are heavy duty units with oversized bearing and cast iron bell, instead of aluminum, for extra long life. These vibrators are compact, noiseless, continuous duty, lightweight, can take any number of starts and stops, and has convenient 115V plug in operation.

Noiseless, heavy duty electric vibrator with adjustable speed and force while running. VIBCO SCR vibrators feature a rugged, permanent magnet DC motor and SCR Controller with overload protection. Plug and play into a standard 115 Volt outlet. No special wiring or circuitry is needed. Accurate, consistent and reliable performance throughout the full speed range. Totally enclosed, non-vented housing makes the SCR Model ideal for use inside or outside or in wet or dusty situations. VIBCO SCR electric vibrators are rated for continuous duty. The SCR Adjustable Speed and Force Vibrators can be used in Bins and Chutes to control feed by going from trickle to torrent even with hard to move materials, in packaging to select and settle by getting ideal shake for optimum densification and settling, in screening for fast, non-binding sifting, scalping and sorting by controlling vibration giving fast and complete results, and also in test tables to verify part integrity, simulate handling and over the road transportation to provide low cost, full range control in multiple speeds, “G” values and amplitudes necessary to meet most specs.

Favorite for use indoors and outdoors where a lightweight, totally enclosed vibrator is required to keep materials moving to automatic productions machines, in small to medium size bins, chutes, screens, etc. Ease of mounting, low amperage draw, makes these units popular for O.E.M. applications. Model FC with high capacity external fan and heat resistant winding makes the FC units ideal for applications where ambient temperature is high or heat is transferred through bin skin. Consult VIBCO for application limits.

VIBCO now offers the first American made explosion proof motor vibrator in NEMA 42, 48, 56 and 182 frame sizes. Model 2PX-200 and 4PX-350 in 42 frame and 2PX-450 and 4PX-700 in 48 frame, are supplied in 3 phase and single phase in Class 1 Group D, Div. 1 & 2. Model 4PX-2000 in 56 frame and 4PX-5000 in182 frame, are supplied in 3 phase, Class 2 Group F & G. Div. 1 & 2. The eccentrics have 6 adjustable force settings for easy adjustment to match impact force to applications. Oversized roller bearings in Models 4PX-2000 & 4PX-5000 assure extra long life. Accessible lubricator nipples make them easy to lubricate. The other models have ball bearings which are pre-lubricated for life. VIBCO’s Heavy Duty Line is classified as Class II Div. 2.

VIBCO’s popular SFC Vibrators, end mounted, are favorite for use indoors and outdoors where a lightweight, totally enclosed vibrator is required to keep materials moving to automatic productions machines, in small to medium size bins, chutes, screens, etc. Ease of mounting, low amperage draw, makes these units popular for O.E.M. applications. These vibrators are totally enclosed, have continuous duty, adjustable eccentrics, available in single and three phase models, and can take any number of starts and stops.