Cap-Level II & IIA are designed for level monitoring and control. The 4-20mA output provides a selectable dampening function to stabilize readings where severe agitation is present. Simple zero and span adjustment make calibration easy. The relay logic circuitry offers the flexibility to control multiple pumps, conveyors, and alarms. Each relay can be set to turn your equipment on and off at any selected point on the probe – without any external latching devices. Failsafe selection gives the security of fault indication and/or conveyor stop if power is lost. The probe configurations and materials offered allow you to custom fit Cap-Level II to your application. Designs such as the type ‘E’ and type ‘H’ tie-down, allow use in tall silos and include a unique cable adjustments.

:: Cap-Level II ::

~ Technical Specifications ~

~ Dimensional Drawing ~

~ Installation & Operation Manual ~

:: Cap-Level IIA ::

~ Technical Specifications ~

~ Dimensional Drawing ~

~ Installation & Operation Manual ~

**NOTE: These units require an application data sheet to be completed or to sign off on a waiver.**